Description
For project 4, you’ll need to be able to start new processes. Error handling is also really important, and will prevent you from accidentally creating a forkbomb.
Getting started
Right click and download this link. This is the skeleton of your lab.
Please be sure to put your name at the top.
This program takes any number of command-line arguments and runs the program specified. I’ve already written the fork() , execvp() and waitpid() system calls for you, but you’ve got some work to do to make it output some useful error messages.
For example, if you compile it and run it like so:
-
./lab7 ls -l total 17
-rwxr-xr-x 1 abc123 UNKNOWN1 6875 Apr 6 02:04 lab7 -rw-r–r– 1 abc123 UNKNOWN1 1593 Apr 6 02:02 lab7.c
———-
-
_
Right now, all it does is run the program, and then print a line of ——– .
This program can serve as the basis of your project 4, since the main responsibility of a shell is to start new processes and report errors from them!
What to do
Read the comments in the code I’ve given you to see what you have to do and where to do it.
https://jarrettbillingsley.github.io/teaching/classes/cs0449/labs/lab7.html 1/4
10/31/2018 Lab 7: Processes and Error handling
This lab is also testing to see if you can follow those instructions by looking up documentation, so use the man pages.
man pages are… dense. They have a lot of information, and they go into a lot of detail. But the important parts to focus on are:
The first paragraph of the “DESCRIPTION” as well as any parts of it that explain the arguments
The “RETURN VALUE” section
Sometimes, the “ERRORS” sections
Here are some pages you will find useful:
man 3 perror
the 3 makes it look up the C library call instead of some MySQL thing.
if the manpages you find make no sense, try putting the 3 in there.
man 3 exit
man execve
man signal
this will tell you how to ignore a kind of signal with the signal()
function.
man waitpid
will tell you about how to check the return value and status from the process.
the WIFEXITED(status) stuff is kinda weird, so here’s an example on how to use those functions:
-
this is code that’s already in the lab7.c file for you. int status;
int childpid = waitpid(-1, &status, 0);
if(WIFEXITED(status))
-
-
it exited normally; use WEXITSTATUS() to extract th
-
-
et cetera…
Things to test
Try running some simple commands that you know will complete successfully.
Your output might look like:
https://jarrettbillingsley.github.io/teaching/classes/cs0449/labs/lab7.html 2/4
10/31/2018 Lab 7: Processes and Error handling
-
./lab7 ls lab7 lab7.c
———-
Program exited successfully!
-
./lab7 echo “hello” hello
———-
Program exited successfully!
$ _
Then try running a valid command that will fail, like trying to ls a directory that doesn’t exist:
$ ./lab7 ls /bogus
ls: cannot access ‘/bogus’: No such file or directory
———-
Program exited with error code 2
$ _
Then try running some bogus commands that should cause the execvp to fail. In addition to printing the message about the invalid command, you should also see a report about the error code – that should be the error code that you pass to the exit() after execvp() failed.
$ ./lab7 aisfjajojojedge
Error running program: No such file or directory
———-
Program exited with error code 1
$ _
Then, try killing a process with a signal. An easy one to use is SIGINT , which is sent when you use ctrl+C . That’s why you set up the SIGINT handler to be ignored. For example:
-
./lab7 cat hello hello ^C———-
https://jarrettbillingsley.github.io/teaching/classes/cs0449/labs/lab7.html 3/4
10/31/2018 Lab 7: Processes and Error handling
Program was terminated by signal: Interrupt
$ _
This happens because cat without arguments simply copies stdin to stdout , so we got trapped in it. Pressing ctrl+C sends SIGINT to cat , which kills it, which your program can detect and print an error about.
Submission
Please remove all the comments I put in the file before you submit.
© 2016-2018 Jarrett Billingsley
https://jarrettbillingsley.github.io/teaching/classes/cs0449/labs/lab7.html 4/4